This breakthrough was made possible by combining 32 of the new 1TB NAND flash packages, each comprised of 16 stacked layers of 512Gb V-NAND chips. These super-dense 1TB packages allow for approximately 5,700 5-gigabyte (GB), full HD movie files to be stored within a mere 2.5-inch storage device.

In addition to the doubled capacity, performance levels have risen significantly and are nearly twice that of Samsung’s previous generation high-capacity SAS SSD. Based on a 12Gb/s SAS interface, the new PM1643 drive features random read and write speeds of up to 400,000 IOPS and 50,000 IOPS, and sequential read and write speeds of up to 2,100MB/s and 1,700 MB/s, respectively. These represent approximately four times the random read performance and three times the sequential read performance of a typical 2.5-inch SATA SSD*.

“With our launch of the 30.72TB SSD, we are once again shattering the enterprise storage capacity barrier, and in the process, opening up new horizons for ultra-high capacity storage systems worldwide,” said Jaesoo Han, executive vice president, Memory Sales & Marketing Team at Samsung Electronics. “Samsung will continue to move aggressively in meeting the shifting demand toward SSDs over 10TB and at the same time, accelerating adoption of our trail-blazing storage solutions in a new age of enterprise systems.”

Samsung reached the new capacity and performance enhancements through several technology progressions in the design of its controller, DRAM packaging and associated software. Included in these advancements is a highly efficient controller architecture that integrates nine controllers from the previous high-capacity SSD lineup into a single package, enabling a greater amount of space within the SSD to be used for storage. The PM1643 drive also applies Through Silicon Via (TSV) technology to interconnect 8Gb DDR4 chips, creating 10 4GB TSV DRAM packages, totaling 40GB of DRAM. This marks the first time that TSV-applied DRAM has been used in an SSD.

Complementing the SSD’s hardware ingenuity is enhanced software that supports metadata protection as well as data retention and recovery from sudden power failures, and an error correction code (ECC) algorithm to ensure high reliability and minimal storage maintenance. Furthermore, the SSD provides a robust endurance level of one full drive write per day (DWPD), which translates into writing 30.72TB of data every day over the five-year warranty period without failure. The PM1643 also offers a mean time between failures (MTBF) of two million hours.

Samsung started manufacturing initial quantities of the 30.72TB SSDs in January and plans to expand the lineup later this year – with 15.36TB, 7.68TB, 3.84TB, 1.92TB, 960GB and 800GB versions – to further drive the growth of all-flash-arrays and accelerate the transition from hard disk drives (HDDs) to SSDs in the enterprise market. The wide range of models and much improved performance will be pivotal in meeting the growing storage needs in a host of market segments, including the government, financial services, healthcare, education, oil & gas, pharmaceutical, social media, business services, retail and communications sectors.

* Compared to 2.5-inch Samsung SSD 850 EVO

Samsung Electronics, announced today that it is introducing the industry’s first 8-gigabyte (GB) LPDDR4 (low power, double data rate 4) mobile DRAM package, which is expected to greatly improve mobile user experiences, especially for those using Ultra HD, large-screen devices. The 8GB mobile DRAM package utilizes four of the newest 16 gigabit (Gb) LPDDR4 memory chips and advanced 10-nanometer (nm)-class* process technology.

“The advent of our powerful 8GB mobile DRAM solution will enable more capable next-generation, flagship mobile devices around the world,” said Joo Sun Choi, executive vice president of Memory Sales and Marketing at Samsung Electronics. “We will continue to provide advanced memory solutions offering the highest values and leading-edge benefits to meet the escalating needs of devices having dual camera, 4K UHD and VR features.”

The new 8GB LPDDR4 operates at up to 4,266 megabits per second (Mbps), which is twice as fast as DDR4 DRAM for PCs working typically at 2,133 Mbps per pin. Assuming a 64 bit (x64) wide memory bus, this can be viewed as transmitting over 34GBs of data per second.

While many high-end ultra-slim note PCs use 8GB of DRAM currently, Samsung’s new 8GB LPDDR4 package will help other next-generation mobile devices take full advantage of its extremely high capacity. For example, equipping tablets with 8GB of LPDDR4 will enable virtual machine operation** and smoother 4K UHD video playback, popular features of many premium PCs.

The Samsung 8GB LPDDR4 DRAM provides much more efficient power consumption thanks to its use of the latest 10nm-class process technology and Samsung’s proprietary low-power circuit design. This circuit design enables the memory chip to double the capacity of the company’s 20nm-class 4GB DRAM package, while consuming approximately the same amount of power.

The 8GB LPDDR4 package has XYZ dimensions of under 15mm by 15mm by 1.0mm, which satisfies space requirements of most new, ultra slim mobile devices. Using a DRAM package thinner than 1.0mm enables stacking the package together with UFS memory or a mobile application processor, depending on device manufacturers’ preferences, which will allow further space savings on the printed circuit board.

In August last year, Samsung introduced the industry-first 20-nanometer 12Gb LPDDR4 DRAM. After only a 14-month development period, Samsung is now introducing the first 10nm-class 16Gb LPDDR4 DRAM and this single-package solution of 8GB LPDDR4 DRAM, which will speed up the launch of next-generation mobile devices with even more advanced performance.

Samsung will continue to rapidly expand production of its DRAM products based on 10nm-class process technology. The company has been manufacturing 10nm-class DRAM on a leading-edge fabrication line and plans to also use the 10nm-process technology in other fabs in the near future, to meet ever-increasing demands for advanced, high-density mobile DRAM.

*10nm-class is a process technology node somewhere between 10 nanometer and 20 nanometer, and 20nm-class is a process technology node somewhere between 20 nanometer and 30 nanometer.

**A virtual machine (VM) is an emulation of a computer system that provides the functionality of a physical computer. Virtual machines allow users to run multiple operating systems (OS) on a single PC.