Samsung Unveils Comprehensive Data Center SSD Lineup for SMBs in India

15-11-2018
Share open/close
URL copied.

Samsung, country’s most trusted consumer electronics and mobile phone brand, today unveiled the Samsung Data Center solid-state drive (SSD) lineup for Small and Medium Business (SMBs) in India. The new portfolio is designed to address the current and future trends in high performance computing storage in the big data era for small and medium businesses (SMBs). Engineered to meet the evolving needs of SMBs, the SSDs are faster with sustained performance and come in higher capacities and enterprise-class reliability and security.

 

 

Samsung’s new SSD portfolio will raise the bar for efficiency compared to legacy storage systems, requiring fewer servers and reduced power and cooling for a lower Total Cost of Ownership (TCO). The new lineup delivers better Quality of Service (QoS) for SMBs by reducing latency and lowering data delays. The entire lineup provides enhanced reliability and endurance for 24/7 operation, backed by a 5-year limited warranty and optimal Drive Writes Per Day (DWPD) ratings.

 

“SMBs want solutions which are value for money and the right fit to their specific business needs. With our strong legacy in technology innovation and OEM engineering expertise, we have brought this simple, yet optimized SSD line up, which is future-proof when it comes to addressing today’s super computer trends,” said Sukesh Jain, Senior Vice President, IT and Mobile Enterprise Business, Samsung India.

 

The comprehensive, new SSD lineup includes the following solutions to meet the widest range of SMB data storage needs:

  • The 860 DCT is designed for servers requiring SSD-levels of sustained performance and is suitable for various applications including content delivery networks. It allows for a lower TCO compared to hard disk drives (HDDs) and offers high capacities up to 4TB. The 860 DCT is the perfect solution for content delivery network systems and comes with a 20 DWPD rating.
  • The 883 DCT is designed for servers used to safeguard critical data, including power loss protection and end-to-end data protection. It offers a high QoS under the SATA interface and will be available in a number of capacities ranging from 240GB to 3.84TB at a 0.8 DWPD rating.
  • The 983 DCT is a high-performance solution for servers using an NVMe™ interface, which allows for blazing-fast speeds and high responsiveness. It comes in two form factors – 2.5-inch and M.2 – and will deliver sequential read/write speeds of up to 3,400/2,200 MB/s (2.5-inch) and 3,000/1,430 MB/s (M.2). The 983 DCT is ideal for real-time big data analytics applications and comes with a 0.8 DWPD rating.
  • The 983 ZET is a powerful cache memory solution that offers a new level of performance with ultra-low latency, high level of QoS, breakthrough speeds and high reliability. It is the perfect storage solution for read cache applications such as hybrid caching servers and NoSQL DB, and it comes with a 10 DWPD rating.

 

All of Samsung’s new Data Center SSDs integrate with the advanced Samsung SSD Toolkit, which allows for efficient and simple maintenance – firmware updates, data erasure, over-provisioning setup and disk status information.

 

The new lineup will start from INR 9,599 going up to INR 2,01,299.

 

 

Key Specifications

860 DCT 883 DCT 983 DCT 983 ZET
Interface SATA 6Gbps SATA 6Gbps PCIe Gen 3.0 x4, NVMe™ 1.2 PCIe Gen 3.0 x4, NVMe™ 1.2
Form Factor 2.5-inch 7mmT 2.5-inch 7mmT 2.5-inch 7mmT(U.2) , M.2 (22110) AIC (HHHL half height, half length)
Hardware NAND Samsung V-NAND Samsung V-NAND Samsung V-NAND Samsung Low Latency V-NAND
CTRL MARU MARU Phoenix Phoenix
DRAM 4GB LPDDR4 (3.84TB)

2GB LPDDR4 (1.92TB)

1GB LPDDR4 (960GB)

4GB LPDDR4 (3.84TB)

2GB LPDDR4 (1.92TB)

1GB LPDDR4  (960GB)

512MB LPDDR4 (480GB, 240GB)

3GB LPDDR4 (1.92TB)

1.5GB LPDDR4  (960GB)

1.5GB LPDDR4
Capacity1 3.84TB, 1.92TB, 960GB 3.84TB, 1.92TB, 960GB, 480GB, 240GB 1.92TB, 960GB 960GB, 480GB
Seq. Read/Write2 Up to 550/520 MB/s Up to 560/520 MB/s (480GB-3.84TB)

Up to 560/320 MB/s (240GB)

Up to 3,400/2,200 MB/s

(2.5-inch 1.92TB)

Up to 3,300/1,300 MB/s

(2.5-inch 960GB)

Up to 3,000/1,430 MB/s

(M.2 1.92TB)

Up to 3,000/1,200 MB/s

(M.2 960GB)

Up to 3,400/3,000 MB/s
Power Loss Protection Not provided Provided Provided Provided
Data encryption Class 0 (AES 256) Class 0 (AES 256) Class 0 (AES 256), TCG/Opal Class 0 (AES 256), TCG/Opal
Total Bytes Written3 Up to 1,396TB (3.84TB)
Up to 698TB (1.92TB)
Up to 349TB (960GB)
Up to 5,466TB (3.84TB)
Up to 2,733TB (1.92TB)
Up to 1,366TB (960GB)
Up to 683TB (480GB)
Up to 341TB (240GB)
Up to 2,733TB (1.92TB)
Up to 1,366TB (960GB)
Up to 17.52PB (960GB)

Up to 7.44PB (480GB)

Warranty4 Up to 5-year limited warranty Up to 5-year limited warranty Up to 5-year limited warranty Up to 5-year limited warranty
DWPD 0.2 0.8 0.8 10.0 (960GB)

8.5 (480GB)

 

 

* 1 1MB = 1,000,000 Bytes, 1GB = 1,000,000,000 Bytes, Unformatted Capacity. User accessible capacity may vary depending on operating environment and formatting.

* 2 For detail test conditions, please refer to each product’s respective data sheet.
*860 DCT, 883 DCT: Performance measured using FIO 2.18 with queue depth 32, Z270 Intel SATA 6G port. Measurements are performed on whole LBA range. Write cache enabled. Performance vary depending on capacity.
*983 DCT: Based on PCI Express Gen3 x4, Random performance measured using FIO 2.7 in CentOS6.6 (kernel 3.14.29) with 4KB (4,096 bytes) of data transfer size in queue depth 32 by 4 workers and Sequential performance with 128KB (131,072 bytes) of data transfer size in queue depth 32 by 1 worker. Actual performance may vary depending on use conditions and environment. 1 MB/sec = 1,000,000 bytes/sec was used in sequential performance
*983 ZET: Based on PCI Express Gen3 x4, Random performance measured using FIO in CentOS 7.0 with queue depth 32 by 4 workers and Sequential performance with queue depth 32 by 1 worker. Actual performance may vary depending on use conditions and environment. 1 MB/sec = 1,000,000 bytes/sec was used in sequential performance

* 3 TBW(Total byte written) is measured while running 100 % random 4 KB writes across the entire SSD (TBW = DWPD x 365 x 3 x User capacity)
*All documented endurance test results are obtained in compliance with JESD218 Standards. Please visit www.jedec.org for detailed information on JESD218 Standards

* 4 For 5-years warranty case, please contact your local Samsung sales representative.

* 5 The NVM Express® design mark is a registered trademark of NVM Express, Inc.

Press Resources > Press Release

Products > Semiconductors

Download

  • Samsung-SSD-883-DCT-e1542105677493.jpg

  • Samsung-SSD-983-DCT.jpg

  • Samsung-SSD-983-DCT-M.2.png

  • Samsung-SSD-983-ZET.jpg

For any issues related to customer service, please go to samsung.com/in/support for assistance.
For media inquiries, please contact corpcommindia@samsung.com.

Check out the latest stories about Samsung

Learn More
TOP